Serving Augusta and all of Maine
Directional drilling contractors in Augusta, ME
Horizontal directional drilling, auger boring and pipe boring in Augusta: conduit, fiber, water, sewer and gas lines put under roads, driveways and landscaping without an open trench.
When a line has to cross a street, a parking lot or a stand of mature trees in Augusta, the cheapest-looking option is rarely to dig. Horizontal directional drilling puts the pipe in from two small pits, steering a pilot bore along a planned path and then pulling the product line back through it. Restoration is a couple of patches instead of a scar across the property.
Open territory · Augusta, ME
Drilling contractors covering Augusta
No single contractor is listed for Maine yet. Call the national line or use the form and the request is routed to a directional drilling contractor working the Augusta area. Estimates are free.
(855) 804-1434What is in the ground in Augusta
Glacial till with boulders and ledge near the surface across most of the state; marine clay along the coast and frost to four feet or more inland.
Fiber to rural towns, water and sewer in the coastal communities and seasonal work windows shaped by frost. Locate requests in Maine go through Dig Safe (811); crossings of state routes are permitted by MaineDOT.
How a bore in Augusta is done
The work in Augusta starts before the rig arrives. The contractor files a locate request with Dig Safe (811), walks the alignment, and plans the bore depth and curve around the marked utilities and anything the locate cannot see, such as private lines, septic systems and old abandoned pipe. The pilot bore is tracked from the surface every rod, so the crew knows exactly where the head is in relation to what it must miss.
Hiring a drilling contractor in Augusta
Price per foot is the least useful number on a Augusta drilling quote. The things that change the cost are the ground, the diameter, the depth the permit forces, the length of the run and how much of the site has to stay open to traffic. Get the quote broken out that way, confirm who pulls permits and calls in locates, and compare contractors on the finished crossing rather than the footage rate.
Estimates are free. Call now: (855) 804-1434.
Drilling and boring services in Augusta
Each page explains one method or utility type: what gets installed, how deep, what the permit requires and what moves the price.
Directional Drilling
Horizontal directional drilling (HDD) for new underground utilities: steered bores under roads, driveways, parking lots, creeks and landscaping with no open trench.
Directional Drilling explained →
Horizontal Boring
Horizontal boring for conduit, casing and carrier pipe where digging across a surface is not an option.
Horizontal Boring explained →
Auger Boring
Steel-cased auger bores for road, rail and railroad crossings that need a straight, on-grade casing.
Auger Boring explained →
Pipe Boring
Boring and pulling in HDPE or steel product pipe from a few inches up to large-diameter casings.
Pipe Boring explained →
Fiber Optic Drilling
Directional drilling for fiber and communications duct: long bores, multiple ducts in one pull, tight easements.
Fiber Optic Drilling explained →
Electrical Conduit Drilling
Bores for primary and secondary power conduit, lighting circuits and site electrical feeds.
Electrical Conduit Drilling explained →
Utility Drilling
Multi-utility installs for developers and utilities: power, gas, water, sewer and telecom on one site plan.
Utility Drilling explained →
Sewer Line Drilling
Directional drilling and boring for new gravity-adjusted force mains, laterals and sewer crossings.
Sewer Line Drilling explained →
Water Main Drilling
HDD installation of new water mains and service lines, including creek and road crossings.
Water Main Drilling explained →
Gas Line Drilling
Bores for new natural gas mains and services, coordinated with the utility and its operator-qualification rules.
Gas Line Drilling explained →
Questions we hear in Augusta
How long does a bore take in Augusta?+
A single residential or small commercial crossing of a few hundred feet is usually a one- or two-day job including setup, pilot bore, reaming and pullback. Longer or larger bores, rock, and permit-driven traffic control stretch that out. Restoration is limited to the two pits.
Can directional drilling install a sewer line in Augusta?+
Yes, with planning. Gravity sewer needs a consistent slope that HDD can hold on shorter bores with careful steering; force mains and pressure sewer have no slope requirement and are routine. Many Augusta sewer crossings are done by auger boring with a steel casing when exact grade is critical.
Do I need a permit to bore under a street in Augusta?+
Yes. Work in a public right-of-way needs a permit from the city or county, and a crossing of a state route needs a Maine DOT encroachment or utility permit. Railroad crossings have their own agreement. Your contractor should file these; make sure the quote says who does.
How do I get a directional drilling estimate in Augusta?+
Call (855) 804-1434 or use the form on this page and the request is routed to a drilling contractor covering Augusta; estimates are free. Have the length of the run, what is going in the ground and what it crosses ready, and a site walk will usually confirm the price.
More Maine cities
Every listed city in Maine has its own page; the Maine page covers the state's ground, permits and contractor.