Skip to content

Directional drilling & boring · Serving Fort Meyers and all of Florida

(855) 520-2670

Davis Underground Solutions, Inc. Davis Underground Solutions, Inc.

Serving Fort Meyers and all of Florida

Directional drilling contractors in Fort Meyers, FL

Horizontal directional drilling, auger boring and pipe boring in Fort Meyers: conduit, fiber, water, sewer and gas lines put under roads, driveways and landscaping without an open trench.

Call (855) 520-2670Estimates are free. Call now. Request a free estimate

When a line has to cross a street, a parking lot or a stand of mature trees in Fort Meyers, the cheapest-looking option is rarely to dig. Horizontal directional drilling puts the pipe in from two small pits, steering a pilot bore along a planned path and then pulling the product line back through it. Restoration is a couple of patches instead of a scar across the property.

In Florida the listed contractor is Davis Underground Solutions, Inc., based in Powder Springs, Georgia, which drills across the Southeast and quotes any mobilization up front. See Davis Underground Solutions's Florida drilling page for the crew, the equipment and recent projects, or call (855) 520-2670; estimates are free.

Davis Underground Solutions, Inc.

Serving Fort Meyers and all of Florida

Davis Underground Solutions, Inc.

Directional drilling, auger boring and utility installation; locates, bore plan and permits handled. It's boring. But we dig it.

(855) 520-2670

What is in the ground in Fort Meyers

Sand over limestone almost everywhere, with a water table often a few feet down; central Florida adds karst and sinkhole-prone ground, and the Panhandle has more clay. Drilling fluid returns and inadvertent returns into wetlands get close attention.

Reclaimed-water mains, fiber and power for new communities, lift-station force mains and canal and roadway crossings run year-round, with FDOT and water-management-district permits on most jobs. Locate requests in Florida go through Sunshine 811; crossings of state routes are permitted by FDOT.

How a bore in Fort Meyers is done

The work in Fort Meyers starts before the rig arrives. The contractor files a locate request with Sunshine 811, walks the alignment, and plans the bore depth and curve around the marked utilities and anything the locate cannot see, such as private lines, septic systems and old abandoned pipe. The pilot bore is tracked from the surface every rod, so the crew knows exactly where the head is in relation to what it must miss.

Hiring a drilling contractor in Fort Meyers

Price per foot is the least useful number on a Fort Meyers drilling quote. The things that change the cost are the ground, the diameter, the depth the permit forces, the length of the run and how much of the site has to stay open to traffic. Get the quote broken out that way, confirm who pulls permits and calls in locates, and compare contractors on the finished crossing rather than the footage rate.

Estimates are free. Call now: (855) 520-2670.

Drilling and boring services in Fort Meyers

Each page explains one method or utility type: what gets installed, how deep, what the permit requires and what moves the price.

Directional Drilling

Horizontal directional drilling (HDD) for new underground utilities: steered bores under roads, driveways, parking lots, creeks and landscaping with no open trench.

Directional Drilling explained →

Horizontal Boring

Horizontal boring for conduit, casing and carrier pipe where digging across a surface is not an option.

Horizontal Boring explained →

Auger Boring

Steel-cased auger bores for road, rail and railroad crossings that need a straight, on-grade casing.

Auger Boring explained →

Pipe Boring

Boring and pulling in HDPE or steel product pipe from a few inches up to large-diameter casings.

Pipe Boring explained →

Fiber Optic Drilling

Directional drilling for fiber and communications duct: long bores, multiple ducts in one pull, tight easements.

Fiber Optic Drilling explained →

Electrical Conduit Drilling

Bores for primary and secondary power conduit, lighting circuits and site electrical feeds.

Electrical Conduit Drilling explained →

Utility Drilling

Multi-utility installs for developers and utilities: power, gas, water, sewer and telecom on one site plan.

Utility Drilling explained →

Sewer Line Drilling

Directional drilling and boring for new gravity-adjusted force mains, laterals and sewer crossings.

Sewer Line Drilling explained →

Water Main Drilling

HDD installation of new water mains and service lines, including creek and road crossings.

Water Main Drilling explained →

Gas Line Drilling

Bores for new natural gas mains and services, coordinated with the utility and its operator-qualification rules.

Gas Line Drilling explained →

Questions we hear in Fort Meyers

Can directional drilling install a sewer line in Fort Meyers?+

Yes, with planning. Gravity sewer needs a consistent slope that HDD can hold on shorter bores with careful steering; force mains and pressure sewer have no slope requirement and are routine. Many Fort Meyers sewer crossings are done by auger boring with a steel casing when exact grade is critical.

Do I need a permit to bore under a street in Fort Meyers?+

Yes. Work in a public right-of-way needs a permit from the city or county, and a crossing of a state route needs a Florida DOT encroachment or utility permit. Railroad crossings have their own agreement. Your contractor should file these; make sure the quote says who does.

How long does a bore take in Fort Meyers?+

A single residential or small commercial crossing of a few hundred feet is usually a one- or two-day job including setup, pilot bore, reaming and pullback. Longer or larger bores, rock, and permit-driven traffic control stretch that out. Restoration is limited to the two pits.

How do I get a directional drilling estimate in Fort Meyers?+

Call Davis Underground Solutions, Inc. at (855) 520-2670; estimates are free, and the crew that answers is the one that does the work. Have the length of the run, what is going in the ground and what it crosses ready, and a site walk will usually confirm the price.

More Florida cities

Every listed city in Florida has its own page; the Florida page covers the state's ground, permits and contractor.

Free Estimates

Tell us what needs to go in the ground in Fort Meyers.

Length of the run, what is being installed (conduit, duct, water, sewer, gas), what it has to cross, and where the plans stand. A crew that bores for a living can usually price it from that and a site walk.

Estimates are free. Call now. (855) 520-2670
  • ✓ Road, driveway, creek and rail crossings without cutting the surface
  • ✓ Conduit, duct, casing and product pipe from 2" to large diameter
  • ✓ Locates, bore plans and utility coordination handled
  • ✓ Crews travel; a mobilization fee is quoted up front on far jobs

Request a free estimate

Goes straight to Davis Underground Solutions. You will hear back within 24 hours.

No obligation. Your details go only to the drilling contractor handling your area.