Serving Meridian and all of Idaho
Directional drilling contractors in Meridian, ID
Horizontal directional drilling, auger boring and pipe boring in Meridian: conduit, fiber, water, sewer and gas lines put under roads, driveways and landscaping without an open trench.
When a line has to cross a street, a parking lot or a stand of mature trees in Meridian, the cheapest-looking option is rarely to dig. Horizontal directional drilling puts the pipe in from two small pits, steering a pilot bore along a planned path and then pulling the product line back through it. Restoration is a couple of patches instead of a scar across the property.
Open territory · Meridian, ID
Drilling contractors covering Meridian
No single contractor is listed for Idaho yet. Call the national line or use the form and the request is routed to a directional drilling contractor working the Meridian area. Estimates are free.
(855) 804-1434What is in the ground in Meridian
The Treasure Valley is sand, gravel and cobble over basalt; the Snake River plain is lava rock near the surface, and northern Idaho has glacial soils and granite.
Boise-area growth, irrigation and water-system crossings and fiber along the I-84 corridor. Locate requests in Idaho go through Dig Line (811); crossings of state routes are permitted by ITD.
How a bore in Meridian is done
The work in Meridian starts before the rig arrives. The contractor files a locate request with Dig Line (811), walks the alignment, and plans the bore depth and curve around the marked utilities and anything the locate cannot see, such as private lines, septic systems and old abandoned pipe. The pilot bore is tracked from the surface every rod, so the crew knows exactly where the head is in relation to what it must miss.
Hiring a drilling contractor in Meridian
Price per foot is the least useful number on a Meridian drilling quote. The things that change the cost are the ground, the diameter, the depth the permit forces, the length of the run and how much of the site has to stay open to traffic. Get the quote broken out that way, confirm who pulls permits and calls in locates, and compare contractors on the finished crossing rather than the footage rate.
Estimates are free. Call now: (855) 804-1434.
Drilling and boring services in Meridian
Each page explains one method or utility type: what gets installed, how deep, what the permit requires and what moves the price.
Directional Drilling
Horizontal directional drilling (HDD) for new underground utilities: steered bores under roads, driveways, parking lots, creeks and landscaping with no open trench.
Directional Drilling explained →
Horizontal Boring
Horizontal boring for conduit, casing and carrier pipe where digging across a surface is not an option.
Horizontal Boring explained →
Auger Boring
Steel-cased auger bores for road, rail and railroad crossings that need a straight, on-grade casing.
Auger Boring explained →
Pipe Boring
Boring and pulling in HDPE or steel product pipe from a few inches up to large-diameter casings.
Pipe Boring explained →
Fiber Optic Drilling
Directional drilling for fiber and communications duct: long bores, multiple ducts in one pull, tight easements.
Fiber Optic Drilling explained →
Electrical Conduit Drilling
Bores for primary and secondary power conduit, lighting circuits and site electrical feeds.
Electrical Conduit Drilling explained →
Utility Drilling
Multi-utility installs for developers and utilities: power, gas, water, sewer and telecom on one site plan.
Utility Drilling explained →
Sewer Line Drilling
Directional drilling and boring for new gravity-adjusted force mains, laterals and sewer crossings.
Sewer Line Drilling explained →
Water Main Drilling
HDD installation of new water mains and service lines, including creek and road crossings.
Water Main Drilling explained →
Gas Line Drilling
Bores for new natural gas mains and services, coordinated with the utility and its operator-qualification rules.
Gas Line Drilling explained →
Questions we hear in Meridian
What happens if the drill hits rock in Meridian?+
An experienced crew plans for the ground they expect from local experience and any borings or utility records, and brings rock tooling if the area is known for it. If rock shows up unexpectedly, the bore may be slowed, redesigned deeper or shallower, or switched to a rock-capable head. Ask how rock is handled in the quote before work starts.
Does the drilling fluid harm my yard or the creek in Meridian?+
Standard drilling fluid is bentonite clay and water, the same material used in pond liners. It is contained in the pits and hauled away or recycled. Crews watch for inadvertent returns, where fluid finds a path to the surface, and stop and contain them; near waterways in Idaho that is a permit condition.
Who calls 811 before a bore in Meridian?+
The contractor files the locate request with Dig Line (811) a few business days before drilling, and the public utilities mark their lines on the ground. Private lines on your property, such as irrigation, septic, propane or lighting, are not marked by 811 and need a private locator or your own knowledge of the site.
How do I get a directional drilling estimate in Meridian?+
Call (855) 804-1434 or use the form on this page and the request is routed to a drilling contractor covering Meridian; estimates are free. Have the length of the run, what is going in the ground and what it crosses ready, and a site walk will usually confirm the price.
More Idaho cities
Every listed city in Idaho has its own page; the Idaho page covers the state's ground, permits and contractor.