Serving Omaha and all of Nebraska
Directional drilling contractors in Omaha, NE
Horizontal directional drilling, auger boring and pipe boring in Omaha: conduit, fiber, water, sewer and gas lines put under roads, driveways and landscaping without an open trench.
Directional drilling in Omaha is how new conduit, fiber, water, sewer and gas lines get under a road, a driveway or a yard without anyone opening a trench across it. A small pit at each end, a steered bore between them, and the pipe is pulled back through the hole. The surface stays as it was, traffic keeps moving and the landscaping survives.
Open territory · Omaha, NE
Drilling contractors covering Omaha
No single contractor is listed for Nebraska yet. Call the national line or use the form and the request is routed to a directional drilling contractor working the Omaha area. Estimates are free.
(855) 804-1434What is in the ground in Omaha
Omaha sits on loess and glacial till with alluvial sand along the Missouri and Papillion creeks and a water table that rises near the river. OPPD conduit, MUD gas and water work and fiber for growth on the west side keep bores busy, and crossings of I-80, I-680 and the creek channels need NDOT or Papio-Missouri River NRD permits.
Public-power and irrigation projects, fiber for rural electric and telephone cooperatives and water-main work in the two metros. Locate requests in Nebraska go through Nebraska 811; crossings of state routes are permitted by NDOT.
How a bore in Omaha is done
A bore in Omaha is planned backward from what the pipe can tolerate. The bend radius of the product, the depth the permit requires under a Nebraska road or a creek, and the soil along the path set the entry angle and the length. The pilot pass is steered and tracked from the surface; one or more reaming passes open the hole, and the pipe or conduit is pulled back through on the last pass with a swivel so it does not twist.
Hiring a drilling contractor in Omaha
Ask any contractor quoting work in Omaha for the bore plan, not just a price per foot. It should show depth, entry and exit points, the soil they expect and how they will handle fluid. Ask who owns the rig and who is on the crew, whether they carry the permits for Nebraska road or rail crossings, and what happens if the bore meets rock or an unmarked line. Written answers to those questions tell you more than the number at the bottom.
Estimates are free. Call now: (855) 804-1434.
Drilling and boring services in Omaha
Each page explains one method or utility type: what gets installed, how deep, what the permit requires and what moves the price.
Directional Drilling
Horizontal directional drilling (HDD) for new underground utilities: steered bores under roads, driveways, parking lots, creeks and landscaping with no open trench.
Directional Drilling explained →
Horizontal Boring
Horizontal boring for conduit, casing and carrier pipe where digging across a surface is not an option.
Horizontal Boring explained →
Auger Boring
Steel-cased auger bores for road, rail and railroad crossings that need a straight, on-grade casing.
Auger Boring explained →
Pipe Boring
Boring and pulling in HDPE or steel product pipe from a few inches up to large-diameter casings.
Pipe Boring explained →
Fiber Optic Drilling
Directional drilling for fiber and communications duct: long bores, multiple ducts in one pull, tight easements.
Fiber Optic Drilling explained →
Electrical Conduit Drilling
Bores for primary and secondary power conduit, lighting circuits and site electrical feeds.
Electrical Conduit Drilling explained →
Utility Drilling
Multi-utility installs for developers and utilities: power, gas, water, sewer and telecom on one site plan.
Utility Drilling explained →
Sewer Line Drilling
Directional drilling and boring for new gravity-adjusted force mains, laterals and sewer crossings.
Sewer Line Drilling explained →
Water Main Drilling
HDD installation of new water mains and service lines, including creek and road crossings.
Water Main Drilling explained →
Gas Line Drilling
Bores for new natural gas mains and services, coordinated with the utility and its operator-qualification rules.
Gas Line Drilling explained →
Questions we hear in Omaha
Does the drilling fluid harm my yard or the creek in Omaha?+
Standard drilling fluid is bentonite clay and water, the same material used in pond liners. It is contained in the pits and hauled away or recycled. Crews watch for inadvertent returns, where fluid finds a path to the surface, and stop and contain them; near waterways in Nebraska that is a permit condition.
Who calls 811 before a bore in Omaha?+
The contractor files the locate request with Nebraska 811 a few business days before drilling, and the public utilities mark their lines on the ground. Private lines on your property, such as irrigation, septic, propane or lighting, are not marked by 811 and need a private locator or your own knowledge of the site.
What happens if the drill hits rock in Omaha?+
An experienced crew plans for the ground they expect from local experience and any borings or utility records, and brings rock tooling if the area is known for it. If rock shows up unexpectedly, the bore may be slowed, redesigned deeper or shallower, or switched to a rock-capable head. Ask how rock is handled in the quote before work starts.
How do I get a directional drilling estimate in Omaha?+
Call (855) 804-1434 or use the form on this page and the request is routed to a drilling contractor covering Omaha; estimates are free. Have the length of the run, what is going in the ground and what it crosses ready, and a site walk will usually confirm the price.
More Nebraska cities
Every listed city in Nebraska has its own page; the Nebraska page covers the state's ground, permits and contractor.