Serving Saint George and all of Utah
Directional drilling contractors in Saint George, UT
Horizontal directional drilling, auger boring and pipe boring in Saint George: conduit, fiber, water, sewer and gas lines put under roads, driveways and landscaping without an open trench.
When a line has to cross a street, a parking lot or a stand of mature trees in Saint George, the cheapest-looking option is rarely to dig. Horizontal directional drilling puts the pipe in from two small pits, steering a pilot bore along a planned path and then pulling the product line back through it. Restoration is a couple of patches instead of a scar across the property.
Open territory · Saint George, UT
Drilling contractors covering Saint George
No single contractor is listed for Utah yet. Call the national line or use the form and the request is routed to a directional drilling contractor working the Saint George area. Estimates are free.
(855) 804-1434What is in the ground in Saint George
Lake Bonneville clay and silt along the Wasatch Front with cobbles and gravel in the benches; southern Utah is sandstone and sand, and the mountain valleys are glacial till.
Growth from Ogden to Provo, fiber for city networks, water conservation mains and canal and highway crossings. Locate requests in Utah go through Blue Stakes of Utah 811; crossings of state routes are permitted by UDOT.
How a bore in Saint George is done
The work in Saint George starts before the rig arrives. The contractor files a locate request with Blue Stakes of Utah 811, walks the alignment, and plans the bore depth and curve around the marked utilities and anything the locate cannot see, such as private lines, septic systems and old abandoned pipe. The pilot bore is tracked from the surface every rod, so the crew knows exactly where the head is in relation to what it must miss.
Hiring a drilling contractor in Saint George
Price per foot is the least useful number on a Saint George drilling quote. The things that change the cost are the ground, the diameter, the depth the permit forces, the length of the run and how much of the site has to stay open to traffic. Get the quote broken out that way, confirm who pulls permits and calls in locates, and compare contractors on the finished crossing rather than the footage rate.
Estimates are free. Call now: (855) 804-1434.
Drilling and boring services in Saint George
Each page explains one method or utility type: what gets installed, how deep, what the permit requires and what moves the price.
Directional Drilling
Horizontal directional drilling (HDD) for new underground utilities: steered bores under roads, driveways, parking lots, creeks and landscaping with no open trench.
Directional Drilling explained →
Horizontal Boring
Horizontal boring for conduit, casing and carrier pipe where digging across a surface is not an option.
Horizontal Boring explained →
Auger Boring
Steel-cased auger bores for road, rail and railroad crossings that need a straight, on-grade casing.
Auger Boring explained →
Pipe Boring
Boring and pulling in HDPE or steel product pipe from a few inches up to large-diameter casings.
Pipe Boring explained →
Fiber Optic Drilling
Directional drilling for fiber and communications duct: long bores, multiple ducts in one pull, tight easements.
Fiber Optic Drilling explained →
Electrical Conduit Drilling
Bores for primary and secondary power conduit, lighting circuits and site electrical feeds.
Electrical Conduit Drilling explained →
Utility Drilling
Multi-utility installs for developers and utilities: power, gas, water, sewer and telecom on one site plan.
Utility Drilling explained →
Sewer Line Drilling
Directional drilling and boring for new gravity-adjusted force mains, laterals and sewer crossings.
Sewer Line Drilling explained →
Water Main Drilling
HDD installation of new water mains and service lines, including creek and road crossings.
Water Main Drilling explained →
Gas Line Drilling
Bores for new natural gas mains and services, coordinated with the utility and its operator-qualification rules.
Gas Line Drilling explained →
Questions we hear in Saint George
How deep does a directional bore go under a road in Saint George?+
Most road crossings in Utah are bored 4 to 10 feet below the pavement, deeper under state highways and railroads where the permit sets a minimum cover. The depth also depends on the pipe diameter and the bend radius the product can tolerate; a longer bore lets the crew ease down to depth and back up more gradually.
What size pipe can be installed by directional drilling in Saint George?+
Residential and small commercial bores commonly place 1-inch to 6-inch conduit, water or gas lines. Mid-size rigs handle 8-inch to 16-inch product, and large rigs install 24-inch and larger steel or HDPE under rivers and highways. The soil and the length of the run matter as much as the rig's rated pullback.
Is directional drilling cheaper than digging a trench in Saint George?+
For a crossing under pavement, a driveway, mature landscaping or a creek, boring is almost always cheaper once you count the cutting, backfill, repaving and restoration that a trench requires. In an open field with nothing to cross, a trench can be less. A good contractor will tell you which applies to your job.
How do I get a directional drilling estimate in Saint George?+
Call (855) 804-1434 or use the form on this page and the request is routed to a drilling contractor covering Saint George; estimates are free. Have the length of the run, what is going in the ground and what it crosses ready, and a site walk will usually confirm the price.
More Utah cities
Every listed city in Utah has its own page; the Utah page covers the state's ground, permits and contractor.