Skip to content

Directional drilling & boring · Serving St Petersburg and all of Florida

(855) 520-2670

Davis Underground Solutions, Inc. Davis Underground Solutions, Inc.

Serving St Petersburg and all of Florida

Directional drilling contractors in St Petersburg, FL

Horizontal directional drilling, auger boring and pipe boring in St Petersburg: conduit, fiber, water, sewer and gas lines put under roads, driveways and landscaping without an open trench.

Call (855) 520-2670Estimates are free. Call now. Request a free estimate

When a line has to cross a street, a parking lot or a stand of mature trees in St Petersburg, the cheapest-looking option is rarely to dig. Horizontal directional drilling puts the pipe in from two small pits, steering a pilot bore along a planned path and then pulling the product line back through it. Restoration is a couple of patches instead of a scar across the property.

In Florida the listed contractor is Davis Underground Solutions, Inc., based in Powder Springs, Georgia, which drills across the Southeast and quotes any mobilization up front. See Davis Underground Solutions's Florida drilling page for the crew, the equipment and recent projects, or call (855) 520-2670; estimates are free.

Davis Underground Solutions, Inc.

Serving St Petersburg and all of Florida

Davis Underground Solutions, Inc.

Directional drilling, auger boring and utility installation; locates, bore plan and permits handled. It's boring. But we dig it.

(855) 520-2670

What is in the ground in St Petersburg

Sand over limestone almost everywhere, with a water table often a few feet down; central Florida adds karst and sinkhole-prone ground, and the Panhandle has more clay. Drilling fluid returns and inadvertent returns into wetlands get close attention.

Reclaimed-water mains, fiber and power for new communities, lift-station force mains and canal and roadway crossings run year-round, with FDOT and water-management-district permits on most jobs. Locate requests in Florida go through Sunshine 811; crossings of state routes are permitted by FDOT.

How a bore in St Petersburg is done

The work in St Petersburg starts before the rig arrives. The contractor files a locate request with Sunshine 811, walks the alignment, and plans the bore depth and curve around the marked utilities and anything the locate cannot see, such as private lines, septic systems and old abandoned pipe. The pilot bore is tracked from the surface every rod, so the crew knows exactly where the head is in relation to what it must miss.

Hiring a drilling contractor in St Petersburg

Price per foot is the least useful number on a St Petersburg drilling quote. The things that change the cost are the ground, the diameter, the depth the permit forces, the length of the run and how much of the site has to stay open to traffic. Get the quote broken out that way, confirm who pulls permits and calls in locates, and compare contractors on the finished crossing rather than the footage rate.

Estimates are free. Call now: (855) 520-2670.

Drilling and boring services in St Petersburg

Each page explains one method or utility type: what gets installed, how deep, what the permit requires and what moves the price.

Directional Drilling

Horizontal directional drilling (HDD) for new underground utilities: steered bores under roads, driveways, parking lots, creeks and landscaping with no open trench.

Directional Drilling explained →

Horizontal Boring

Horizontal boring for conduit, casing and carrier pipe where digging across a surface is not an option.

Horizontal Boring explained →

Auger Boring

Steel-cased auger bores for road, rail and railroad crossings that need a straight, on-grade casing.

Auger Boring explained →

Pipe Boring

Boring and pulling in HDPE or steel product pipe from a few inches up to large-diameter casings.

Pipe Boring explained →

Fiber Optic Drilling

Directional drilling for fiber and communications duct: long bores, multiple ducts in one pull, tight easements.

Fiber Optic Drilling explained →

Electrical Conduit Drilling

Bores for primary and secondary power conduit, lighting circuits and site electrical feeds.

Electrical Conduit Drilling explained →

Utility Drilling

Multi-utility installs for developers and utilities: power, gas, water, sewer and telecom on one site plan.

Utility Drilling explained →

Sewer Line Drilling

Directional drilling and boring for new gravity-adjusted force mains, laterals and sewer crossings.

Sewer Line Drilling explained →

Water Main Drilling

HDD installation of new water mains and service lines, including creek and road crossings.

Water Main Drilling explained →

Gas Line Drilling

Bores for new natural gas mains and services, coordinated with the utility and its operator-qualification rules.

Gas Line Drilling explained →

Questions we hear in St Petersburg

What size pipe can be installed by directional drilling in St Petersburg?+

Residential and small commercial bores commonly place 1-inch to 6-inch conduit, water or gas lines. Mid-size rigs handle 8-inch to 16-inch product, and large rigs install 24-inch and larger steel or HDPE under rivers and highways. The soil and the length of the run matter as much as the rig's rated pullback.

Is directional drilling cheaper than digging a trench in St Petersburg?+

For a crossing under pavement, a driveway, mature landscaping or a creek, boring is almost always cheaper once you count the cutting, backfill, repaving and restoration that a trench requires. In an open field with nothing to cross, a trench can be less. A good contractor will tell you which applies to your job.

How deep does a directional bore go under a road in St Petersburg?+

Most road crossings in Florida are bored 4 to 10 feet below the pavement, deeper under state highways and railroads where the permit sets a minimum cover. The depth also depends on the pipe diameter and the bend radius the product can tolerate; a longer bore lets the crew ease down to depth and back up more gradually.

How do I get a directional drilling estimate in St Petersburg?+

Call Davis Underground Solutions, Inc. at (855) 520-2670; estimates are free, and the crew that answers is the one that does the work. Have the length of the run, what is going in the ground and what it crosses ready, and a site walk will usually confirm the price.

More Florida cities

Every listed city in Florida has its own page; the Florida page covers the state's ground, permits and contractor.

Free Estimates

Tell us what needs to go in the ground in St Petersburg.

Length of the run, what is being installed (conduit, duct, water, sewer, gas), what it has to cross, and where the plans stand. A crew that bores for a living can usually price it from that and a site walk.

Estimates are free. Call now. (855) 520-2670
  • ✓ Road, driveway, creek and rail crossings without cutting the surface
  • ✓ Conduit, duct, casing and product pipe from 2" to large diameter
  • ✓ Locates, bore plans and utility coordination handled
  • ✓ Crews travel; a mobilization fee is quoted up front on far jobs

Request a free estimate

Goes straight to Davis Underground Solutions. You will hear back within 24 hours.

No obligation. Your details go only to the drilling contractor handling your area.