Serving all of Vermont
Directional drilling contractors in Vermont
Whether the job is a fiber run under a county road, a new water main across a creek or a gas service under a driveway, drilling in Vermont follows the same path: locate through Dig Safe (811), plan the bore for the local ground, pull the VTrans or municipal permit, drill, ream and pull back. Below is what makes Vermont different, and the cities where you can find a contractor.
Open territory · Vermont
Drilling contractors covering Vermont
No single contractor is listed for Vermont yet. Call the national line or use the form and the request is routed to a directional drilling contractor working your part of the state. Estimates are free. Drilling companies that want the Vermont listing can contact us; the first lead is free.
(855) 804-1434The ground in Vermont
Glacial till with boulders and shallow bedrock in the Green Mountains; the Champlain Valley has clay and silt, and frost runs deep across the state.
What is being drilled
Fiber to rural towns under the state's communications union districts, small-town water and sewer and conduit under state roads.
Locates and permits
Every bore starts with a locate request to Dig Safe (811); the member utilities mark their lines within the state's notice period, and private lines on the property need a private locator. Crossings of state highways are permitted by VTrans, city streets and county roads locally, railroads by their own crossing agreements, and waterways by the state environmental agency and, where it applies, the Corps of Engineers.
Estimates are free. Call now: (855) 804-1434.
Vermont cities
Each city page covers the local ground, the typical work and the contractor covering it.
Drilling and boring services
Directional Drilling
Horizontal directional drilling (HDD) for new underground utilities: steered bores under roads, driveways, parking lots, creeks and landscaping with no open trench.
Horizontal Boring
Horizontal boring for conduit, casing and carrier pipe where digging across a surface is not an option.
Auger Boring
Steel-cased auger bores for road, rail and railroad crossings that need a straight, on-grade casing.
Pipe Boring
Boring and pulling in HDPE or steel product pipe from a few inches up to large-diameter casings.
Fiber Optic Drilling
Directional drilling for fiber and communications duct: long bores, multiple ducts in one pull, tight easements.
Electrical Conduit Drilling
Bores for primary and secondary power conduit, lighting circuits and site electrical feeds.
Utility Drilling
Multi-utility installs for developers and utilities: power, gas, water, sewer and telecom on one site plan.
Sewer Line Drilling
Directional drilling and boring for new gravity-adjusted force mains, laterals and sewer crossings.
Water Main Drilling
HDD installation of new water mains and service lines, including creek and road crossings.
Gas Line Drilling
Bores for new natural gas mains and services, coordinated with the utility and its operator-qualification rules.
Vermont drilling questions
Who marks utilities before a bore in Vermont?+
The contractor files a ticket with Dig Safe (811) and the member utilities mark their lines within the state's required notice period. Private lines on the property are not covered and need a private locator.
What permit does a road crossing need in Vermont?+
A crossing of a state highway needs a utility accommodation or encroachment permit from VTrans; city streets and county roads are permitted locally. Railroads issue their own crossing agreements, and waterway crossings may need state environmental or Corps of Engineers review.
How does Vermont ground affect a bore?+
Glacial till with boulders and shallow bedrock in the Green Mountains; the Champlain Valley has clay and silt, and frost runs deep across the state.
Who is drilling in Vermont right now?+
Fiber to rural towns under the state's communications union districts, small-town water and sewer and conduit under state roads.