Skip to content

Directional drilling & boring · Serving Erie and all of Pennsylvania

(855) 804-1434

D Directional-Drilling.net Erie

Serving Erie and all of Pennsylvania

Directional drilling contractors in Erie, PA

Horizontal directional drilling, auger boring and pipe boring in Erie: conduit, fiber, water, sewer and gas lines put under roads, driveways and landscaping without an open trench.

Call (855) 804-1434Estimates are free. Call now. Request a free estimate

When a line has to cross a street, a parking lot or a stand of mature trees in Erie, the cheapest-looking option is rarely to dig. Horizontal directional drilling puts the pipe in from two small pits, steering a pilot bore along a planned path and then pulling the product line back through it. Restoration is a couple of patches instead of a scar across the property.

Open territory · Erie, PA

Drilling contractors covering Erie

No single contractor is listed for Pennsylvania yet. Call the national line or use the form and the request is routed to a directional drilling contractor working the Erie area. Estimates are free.

(855) 804-1434

What is in the ground in Erie

Erie sits on lake-plain clay and glacial till with shale close to the surface south of the city and soft ground along Presque Isle Bay. Gas-main renewal, water work and fiber in the older neighborhoods lean on HDD, and crossings of I-90, I-79 and the Bayfront Parkway need PennDOT permits in a frost-bounded season.

Gas-main replacement, water-main renewal in the older cities, fiber in the suburbs and natural-gas gathering and distribution lines in the shale regions. Locate requests in Pennsylvania go through Pennsylvania 811; crossings of state routes are permitted by PennDOT.

How a bore in Erie is done

The work in Erie starts before the rig arrives. The contractor files a locate request with Pennsylvania 811, walks the alignment, and plans the bore depth and curve around the marked utilities and anything the locate cannot see, such as private lines, septic systems and old abandoned pipe. The pilot bore is tracked from the surface every rod, so the crew knows exactly where the head is in relation to what it must miss.

Hiring a drilling contractor in Erie

Price per foot is the least useful number on a Erie drilling quote. The things that change the cost are the ground, the diameter, the depth the permit forces, the length of the run and how much of the site has to stay open to traffic. Get the quote broken out that way, confirm who pulls permits and calls in locates, and compare contractors on the finished crossing rather than the footage rate.

Estimates are free. Call now: (855) 804-1434.

Drilling and boring services in Erie

Each page explains one method or utility type: what gets installed, how deep, what the permit requires and what moves the price.

Directional Drilling

Horizontal directional drilling (HDD) for new underground utilities: steered bores under roads, driveways, parking lots, creeks and landscaping with no open trench.

Directional Drilling explained →

Horizontal Boring

Horizontal boring for conduit, casing and carrier pipe where digging across a surface is not an option.

Horizontal Boring explained →

Auger Boring

Steel-cased auger bores for road, rail and railroad crossings that need a straight, on-grade casing.

Auger Boring explained →

Pipe Boring

Boring and pulling in HDPE or steel product pipe from a few inches up to large-diameter casings.

Pipe Boring explained →

Fiber Optic Drilling

Directional drilling for fiber and communications duct: long bores, multiple ducts in one pull, tight easements.

Fiber Optic Drilling explained →

Electrical Conduit Drilling

Bores for primary and secondary power conduit, lighting circuits and site electrical feeds.

Electrical Conduit Drilling explained →

Utility Drilling

Multi-utility installs for developers and utilities: power, gas, water, sewer and telecom on one site plan.

Utility Drilling explained →

Sewer Line Drilling

Directional drilling and boring for new gravity-adjusted force mains, laterals and sewer crossings.

Sewer Line Drilling explained →

Water Main Drilling

HDD installation of new water mains and service lines, including creek and road crossings.

Water Main Drilling explained →

Gas Line Drilling

Bores for new natural gas mains and services, coordinated with the utility and its operator-qualification rules.

Gas Line Drilling explained →

Questions we hear in Erie

Can directional drilling install a sewer line in Erie?+

Yes, with planning. Gravity sewer needs a consistent slope that HDD can hold on shorter bores with careful steering; force mains and pressure sewer have no slope requirement and are routine. Many Erie sewer crossings are done by auger boring with a steel casing when exact grade is critical.

Do I need a permit to bore under a street in Erie?+

Yes. Work in a public right-of-way needs a permit from the city or county, and a crossing of a state route needs a Pennsylvania DOT encroachment or utility permit. Railroad crossings have their own agreement. Your contractor should file these; make sure the quote says who does.

How long does a bore take in Erie?+

A single residential or small commercial crossing of a few hundred feet is usually a one- or two-day job including setup, pilot bore, reaming and pullback. Longer or larger bores, rock, and permit-driven traffic control stretch that out. Restoration is limited to the two pits.

How do I get a directional drilling estimate in Erie?+

Call (855) 804-1434 or use the form on this page and the request is routed to a drilling contractor covering Erie; estimates are free. Have the length of the run, what is going in the ground and what it crosses ready, and a site walk will usually confirm the price.

More Pennsylvania cities

Every listed city in Pennsylvania has its own page; the Pennsylvania page covers the state's ground, permits and contractor.

Free Estimates

Tell us what needs to go in the ground in Erie.

Length of the run, what is being installed (conduit, duct, water, sewer, gas), what it has to cross, and where the plans stand. A crew that bores for a living can usually price it from that and a site walk.

Estimates are free. Call now. (855) 804-1434
  • ✓ Road, driveway, creek and rail crossings without cutting the surface
  • ✓ Conduit, duct, casing and product pipe from 2" to large diameter
  • ✓ Locates, bore plans and utility coordination handled
  • ✓ Crews travel; a mobilization fee is quoted up front on far jobs

Request a free estimate

We match you with a drilling contractor covering Erie.

No obligation. Your details go only to the drilling contractor handling your area.