Serving Pittsburgh and all of Pennsylvania
Directional drilling contractors in Pittsburgh, PA
Horizontal directional drilling, auger boring and pipe boring in Pittsburgh: conduit, fiber, water, sewer and gas lines put under roads, driveways and landscaping without an open trench.
Property owners, builders and utilities in Pittsburgh call a boring contractor for the same reason: something has to go in the ground where the surface cannot be disturbed. Directional drilling and auger boring do that, placing conduit, duct, casing or pipe underneath roads, slabs, creeks and landscaping from entry and exit pits that are a few feet square.
Open territory · Pittsburgh, PA
Drilling contractors covering Pittsburgh
No single contractor is listed for Pennsylvania yet. Call the national line or use the form and the request is routed to a directional drilling contractor working the Pittsburgh area. Estimates are free.
(855) 804-1434What is in the ground in Pittsburgh
Pittsburgh is shale, sandstone and claystone in steep terrain, with old mine workings under parts of the South Hills and landslide-prone slopes above the rivers. Narrow streets, retaining walls and century-old gas and water mains make open cuts painful, so HDD is the usual answer for conduit, fiber and gas renewals on the hillsides and in the river-flat neighborhoods.
Gas-main replacement, water-main renewal in the older cities, fiber in the suburbs and natural-gas gathering and distribution lines in the shale regions. Locate requests in Pennsylvania go through Pennsylvania 811; crossings of state routes are permitted by PennDOT.
How a bore in Pittsburgh is done
The sequence in Pittsburgh is locate, plan, pilot, ream, pull. The Pennsylvania 811 locate marks the public utilities, the bore plan sets depth and clearances, the pilot bore is steered along that plan and tracked from above, the hole is enlarged to about one and a half times the pipe diameter, and the pipe is pulled back from the exit pit to the entry pit. Fluid returns are contained at both pits and hauled off or recycled.
Hiring a drilling contractor in Pittsburgh
The questions that matter when hiring in Pittsburgh: Has the crew bored in this soil before? Who files the Pennsylvania 811 ticket and the Pennsylvania permits? What diameter and length can the rig on this job handle? What is the plan for fluid returns, and for a bore that drifts off line? Is the price per foot or for the finished crossing? A contractor who bores for a living answers all of them without hesitation.
Estimates are free. Call now: (855) 804-1434.
Drilling and boring services in Pittsburgh
Each page explains one method or utility type: what gets installed, how deep, what the permit requires and what moves the price.
Directional Drilling
Horizontal directional drilling (HDD) for new underground utilities: steered bores under roads, driveways, parking lots, creeks and landscaping with no open trench.
Directional Drilling explained →
Horizontal Boring
Horizontal boring for conduit, casing and carrier pipe where digging across a surface is not an option.
Horizontal Boring explained →
Auger Boring
Steel-cased auger bores for road, rail and railroad crossings that need a straight, on-grade casing.
Auger Boring explained →
Pipe Boring
Boring and pulling in HDPE or steel product pipe from a few inches up to large-diameter casings.
Pipe Boring explained →
Fiber Optic Drilling
Directional drilling for fiber and communications duct: long bores, multiple ducts in one pull, tight easements.
Fiber Optic Drilling explained →
Electrical Conduit Drilling
Bores for primary and secondary power conduit, lighting circuits and site electrical feeds.
Electrical Conduit Drilling explained →
Utility Drilling
Multi-utility installs for developers and utilities: power, gas, water, sewer and telecom on one site plan.
Utility Drilling explained →
Sewer Line Drilling
Directional drilling and boring for new gravity-adjusted force mains, laterals and sewer crossings.
Sewer Line Drilling explained →
Water Main Drilling
HDD installation of new water mains and service lines, including creek and road crossings.
Water Main Drilling explained →
Gas Line Drilling
Bores for new natural gas mains and services, coordinated with the utility and its operator-qualification rules.
Gas Line Drilling explained →
Questions we hear in Pittsburgh
Can directional drilling install a sewer line in Pittsburgh?+
Yes, with planning. Gravity sewer needs a consistent slope that HDD can hold on shorter bores with careful steering; force mains and pressure sewer have no slope requirement and are routine. Many Pittsburgh sewer crossings are done by auger boring with a steel casing when exact grade is critical.
Do I need a permit to bore under a street in Pittsburgh?+
Yes. Work in a public right-of-way needs a permit from the city or county, and a crossing of a state route needs a Pennsylvania DOT encroachment or utility permit. Railroad crossings have their own agreement. Your contractor should file these; make sure the quote says who does.
How long does a bore take in Pittsburgh?+
A single residential or small commercial crossing of a few hundred feet is usually a one- or two-day job including setup, pilot bore, reaming and pullback. Longer or larger bores, rock, and permit-driven traffic control stretch that out. Restoration is limited to the two pits.
How do I get a directional drilling estimate in Pittsburgh?+
Call (855) 804-1434 or use the form on this page and the request is routed to a drilling contractor covering Pittsburgh; estimates are free. Have the length of the run, what is going in the ground and what it crosses ready, and a site walk will usually confirm the price.
More Pennsylvania cities
Every listed city in Pennsylvania has its own page; the Pennsylvania page covers the state's ground, permits and contractor.