Serving Moorhead and all of Minnesota

Directional drilling contractors in Moorhead, MN

Horizontal directional drilling, auger boring and pipe boring in Moorhead: conduit, fiber, water, sewer and gas lines put under roads, driveways and landscaping without an open trench.

Call (855) 804-1434Estimates are free. Call now. Request a free estimate

When a line has to cross a street, a parking lot or a stand of mature trees in Moorhead, the cheapest-looking option is rarely to dig. Horizontal directional drilling puts the pipe in from two small pits, steering a pilot bore along a planned path and then pulling the product line back through it. Restoration is a couple of patches instead of a scar across the property.

Open territory · Moorhead, MN

Drilling contractors covering Moorhead

No single contractor is listed for Minnesota yet. Call the national line or use the form and the request is routed to a directional drilling contractor working the Moorhead area. Estimates are free.

(855) 804-1434

What is in the ground in Moorhead

Glacial till and clay in the Twin Cities with sandstone and limestone bluffs along the Mississippi; sandy outwash in the central lakes region and frost to five feet or more, which shortens the season and sets minimum depths.

Fiber under state border-to-border grants, suburban utility extensions and water and sewer renewals in the metro. Locate requests in Minnesota go through Gopher State One Call (811); crossings of state routes are permitted by MnDOT.

How a bore in Moorhead is done

The work in Moorhead starts before the rig arrives. The contractor files a locate request with Gopher State One Call (811), walks the alignment, and plans the bore depth and curve around the marked utilities and anything the locate cannot see, such as private lines, septic systems and old abandoned pipe. The pilot bore is tracked from the surface every rod, so the crew knows exactly where the head is in relation to what it must miss.

Hiring a drilling contractor in Moorhead

Price per foot is the least useful number on a Moorhead drilling quote. The things that change the cost are the ground, the diameter, the depth the permit forces, the length of the run and how much of the site has to stay open to traffic. Get the quote broken out that way, confirm who pulls permits and calls in locates, and compare contractors on the finished crossing rather than the footage rate.

Estimates are free. Call now: (855) 804-1434.

Drilling and boring services in Moorhead

Each page explains one method or utility type: what gets installed, how deep, what the permit requires and what moves the price.

Directional Drilling

Horizontal directional drilling (HDD) for new underground utilities: steered bores under roads, driveways, parking lots, creeks and landscaping with no open trench.

Directional Drilling explained →

Horizontal Boring

Horizontal boring for conduit, casing and carrier pipe where digging across a surface is not an option.

Horizontal Boring explained →

Auger Boring

Steel-cased auger bores for road, rail and railroad crossings that need a straight, on-grade casing.

Auger Boring explained →

Pipe Boring

Boring and pulling in HDPE or steel product pipe from a few inches up to large-diameter casings.

Pipe Boring explained →

Fiber Optic Drilling

Directional drilling for fiber and communications duct: long bores, multiple ducts in one pull, tight easements.

Fiber Optic Drilling explained →

Electrical Conduit Drilling

Bores for primary and secondary power conduit, lighting circuits and site electrical feeds.

Electrical Conduit Drilling explained →

Utility Drilling

Multi-utility installs for developers and utilities: power, gas, water, sewer and telecom on one site plan.

Utility Drilling explained →

Sewer Line Drilling

Directional drilling and boring for new gravity-adjusted force mains, laterals and sewer crossings.

Sewer Line Drilling explained →

Water Main Drilling

HDD installation of new water mains and service lines, including creek and road crossings.

Water Main Drilling explained →

Gas Line Drilling

Bores for new natural gas mains and services, coordinated with the utility and its operator-qualification rules.

Gas Line Drilling explained →

Questions we hear in Moorhead

Is directional drilling cheaper than digging a trench in Moorhead?+

For a crossing under pavement, a driveway, mature landscaping or a creek, boring is almost always cheaper once you count the cutting, backfill, repaving and restoration that a trench requires. In an open field with nothing to cross, a trench can be less. A good contractor will tell you which applies to your job.

How deep does a directional bore go under a road in Moorhead?+

Most road crossings in Minnesota are bored 4 to 10 feet below the pavement, deeper under state highways and railroads where the permit sets a minimum cover. The depth also depends on the pipe diameter and the bend radius the product can tolerate; a longer bore lets the crew ease down to depth and back up more gradually.

What size pipe can be installed by directional drilling in Moorhead?+

Residential and small commercial bores commonly place 1-inch to 6-inch conduit, water or gas lines. Mid-size rigs handle 8-inch to 16-inch product, and large rigs install 24-inch and larger steel or HDPE under rivers and highways. The soil and the length of the run matter as much as the rig's rated pullback.

How do I get a directional drilling estimate in Moorhead?+

Call (855) 804-1434 or use the form on this page and the request is routed to a drilling contractor covering Moorhead; estimates are free. Have the length of the run, what is going in the ground and what it crosses ready, and a site walk will usually confirm the price.

More Minnesota cities

Every listed city in Minnesota has its own page; the Minnesota page covers the state's ground, permits and contractor.