Serving Saint Paul and all of Minnesota
Directional drilling contractors in Saint Paul, MN
Horizontal directional drilling, auger boring and pipe boring in Saint Paul: conduit, fiber, water, sewer and gas lines put under roads, driveways and landscaping without an open trench.
Property owners, builders and utilities in Saint Paul call a boring contractor for the same reason: something has to go in the ground where the surface cannot be disturbed. Directional drilling and auger boring do that, placing conduit, duct, casing or pipe underneath roads, slabs, creeks and landscaping from entry and exit pits that are a few feet square.
Open territory · Saint Paul, MN
Drilling contractors covering Saint Paul
No single contractor is listed for Minnesota yet. Call the national line or use the form and the request is routed to a directional drilling contractor working the Saint Paul area. Estimates are free.
(855) 804-1434What is in the ground in Saint Paul
Glacial till and clay in the Twin Cities with sandstone and limestone bluffs along the Mississippi; sandy outwash in the central lakes region and frost to five feet or more, which shortens the season and sets minimum depths.
Fiber under state border-to-border grants, suburban utility extensions and water and sewer renewals in the metro. Locate requests in Minnesota go through Gopher State One Call (811); crossings of state routes are permitted by MnDOT.
How a bore in Saint Paul is done
The sequence in Saint Paul is locate, plan, pilot, ream, pull. The Gopher State One Call (811) locate marks the public utilities, the bore plan sets depth and clearances, the pilot bore is steered along that plan and tracked from above, the hole is enlarged to about one and a half times the pipe diameter, and the pipe is pulled back from the exit pit to the entry pit. Fluid returns are contained at both pits and hauled off or recycled.
Hiring a drilling contractor in Saint Paul
The questions that matter when hiring in Saint Paul: Has the crew bored in this soil before? Who files the Gopher State One Call (811) ticket and the Minnesota permits? What diameter and length can the rig on this job handle? What is the plan for fluid returns, and for a bore that drifts off line? Is the price per foot or for the finished crossing? A contractor who bores for a living answers all of them without hesitation.
Estimates are free. Call now: (855) 804-1434.
Drilling and boring services in Saint Paul
Each page explains one method or utility type: what gets installed, how deep, what the permit requires and what moves the price.
Directional Drilling
Horizontal directional drilling (HDD) for new underground utilities: steered bores under roads, driveways, parking lots, creeks and landscaping with no open trench.
Directional Drilling explained →
Horizontal Boring
Horizontal boring for conduit, casing and carrier pipe where digging across a surface is not an option.
Horizontal Boring explained →
Auger Boring
Steel-cased auger bores for road, rail and railroad crossings that need a straight, on-grade casing.
Auger Boring explained →
Pipe Boring
Boring and pulling in HDPE or steel product pipe from a few inches up to large-diameter casings.
Pipe Boring explained →
Fiber Optic Drilling
Directional drilling for fiber and communications duct: long bores, multiple ducts in one pull, tight easements.
Fiber Optic Drilling explained →
Electrical Conduit Drilling
Bores for primary and secondary power conduit, lighting circuits and site electrical feeds.
Electrical Conduit Drilling explained →
Utility Drilling
Multi-utility installs for developers and utilities: power, gas, water, sewer and telecom on one site plan.
Utility Drilling explained →
Sewer Line Drilling
Directional drilling and boring for new gravity-adjusted force mains, laterals and sewer crossings.
Sewer Line Drilling explained →
Water Main Drilling
HDD installation of new water mains and service lines, including creek and road crossings.
Water Main Drilling explained →
Gas Line Drilling
Bores for new natural gas mains and services, coordinated with the utility and its operator-qualification rules.
Gas Line Drilling explained →
Questions we hear in Saint Paul
How long does a bore take in Saint Paul?+
A single residential or small commercial crossing of a few hundred feet is usually a one- or two-day job including setup, pilot bore, reaming and pullback. Longer or larger bores, rock, and permit-driven traffic control stretch that out. Restoration is limited to the two pits.
Can directional drilling install a sewer line in Saint Paul?+
Yes, with planning. Gravity sewer needs a consistent slope that HDD can hold on shorter bores with careful steering; force mains and pressure sewer have no slope requirement and are routine. Many Saint Paul sewer crossings are done by auger boring with a steel casing when exact grade is critical.
Do I need a permit to bore under a street in Saint Paul?+
Yes. Work in a public right-of-way needs a permit from the city or county, and a crossing of a state route needs a Minnesota DOT encroachment or utility permit. Railroad crossings have their own agreement. Your contractor should file these; make sure the quote says who does.
How do I get a directional drilling estimate in Saint Paul?+
Call (855) 804-1434 or use the form on this page and the request is routed to a drilling contractor covering Saint Paul; estimates are free. Have the length of the run, what is going in the ground and what it crosses ready, and a site walk will usually confirm the price.
More Minnesota cities
Every listed city in Minnesota has its own page; the Minnesota page covers the state's ground, permits and contractor.
- Directional drilling Plymouth
- Directional drilling Duluth
- Directional drilling Fergus Falls
- Directional drilling Coon Rapids
- Directional drilling Moorhead
- Directional drilling St Cloud
- Directional drilling Alexandria
- Directional drilling Bloomington
- Directional drilling Eagan
- Directional drilling Minneapolis
- Directional drilling Rochester