Serving Newport News and all of Virginia
Directional drilling contractors in Newport News, VA
Horizontal directional drilling, auger boring and pipe boring in Newport News: conduit, fiber, water, sewer and gas lines put under roads, driveways and landscaping without an open trench.
When a line has to cross a street, a parking lot or a stand of mature trees in Newport News, the cheapest-looking option is rarely to dig. Horizontal directional drilling puts the pipe in from two small pits, steering a pilot bore along a planned path and then pulling the product line back through it. Restoration is a couple of patches instead of a scar across the property.
In Virginia the listed contractor is Davis Underground Solutions, Inc., based in Powder Springs, Georgia, which drills across the Southeast and quotes any mobilization up front. See Davis Underground Solutions's Virginia drilling page for the crew, the equipment and recent projects, or call (855) 520-2670; estimates are free.
Serving Newport News and all of Virginia
Davis Underground Solutions, Inc.
Directional drilling, auger boring and utility installation; locates, bore plan and permits handled. It's boring. But we dig it.
What is in the ground in Newport News
Piedmont clay and saprolite over granite and schist across Northern Virginia and Richmond; the Tidewater is sand and soft clay with a high water table, the Shenandoah Valley is limestone karst, and the southwest is shale and sandstone.
Data-center duct banks in Loudoun and Prince William, fiber to the home under state broadband grants, water and sewer extensions and VDOT highway crossings. Locate requests in Virginia go through Virginia 811; crossings of state routes are permitted by VDOT.
How a bore in Newport News is done
The work in Newport News starts before the rig arrives. The contractor files a locate request with Virginia 811, walks the alignment, and plans the bore depth and curve around the marked utilities and anything the locate cannot see, such as private lines, septic systems and old abandoned pipe. The pilot bore is tracked from the surface every rod, so the crew knows exactly where the head is in relation to what it must miss.
Hiring a drilling contractor in Newport News
Price per foot is the least useful number on a Newport News drilling quote. The things that change the cost are the ground, the diameter, the depth the permit forces, the length of the run and how much of the site has to stay open to traffic. Get the quote broken out that way, confirm who pulls permits and calls in locates, and compare contractors on the finished crossing rather than the footage rate.
Estimates are free. Call now: (855) 520-2670.
Drilling and boring services in Newport News
Each page explains one method or utility type: what gets installed, how deep, what the permit requires and what moves the price.
Directional Drilling
Horizontal directional drilling (HDD) for new underground utilities: steered bores under roads, driveways, parking lots, creeks and landscaping with no open trench.
Directional Drilling explained →
Horizontal Boring
Horizontal boring for conduit, casing and carrier pipe where digging across a surface is not an option.
Horizontal Boring explained →
Auger Boring
Steel-cased auger bores for road, rail and railroad crossings that need a straight, on-grade casing.
Auger Boring explained →
Pipe Boring
Boring and pulling in HDPE or steel product pipe from a few inches up to large-diameter casings.
Pipe Boring explained →
Fiber Optic Drilling
Directional drilling for fiber and communications duct: long bores, multiple ducts in one pull, tight easements.
Fiber Optic Drilling explained →
Electrical Conduit Drilling
Bores for primary and secondary power conduit, lighting circuits and site electrical feeds.
Electrical Conduit Drilling explained →
Utility Drilling
Multi-utility installs for developers and utilities: power, gas, water, sewer and telecom on one site plan.
Utility Drilling explained →
Sewer Line Drilling
Directional drilling and boring for new gravity-adjusted force mains, laterals and sewer crossings.
Sewer Line Drilling explained →
Water Main Drilling
HDD installation of new water mains and service lines, including creek and road crossings.
Water Main Drilling explained →
Gas Line Drilling
Bores for new natural gas mains and services, coordinated with the utility and its operator-qualification rules.
Gas Line Drilling explained →
Questions we hear in Newport News
Do I need a permit to bore under a street in Newport News?+
Yes. Work in a public right-of-way needs a permit from the city or county, and a crossing of a state route needs a Virginia DOT encroachment or utility permit. Railroad crossings have their own agreement. Your contractor should file these; make sure the quote says who does.
How long does a bore take in Newport News?+
A single residential or small commercial crossing of a few hundred feet is usually a one- or two-day job including setup, pilot bore, reaming and pullback. Longer or larger bores, rock, and permit-driven traffic control stretch that out. Restoration is limited to the two pits.
Can directional drilling install a sewer line in Newport News?+
Yes, with planning. Gravity sewer needs a consistent slope that HDD can hold on shorter bores with careful steering; force mains and pressure sewer have no slope requirement and are routine. Many Newport News sewer crossings are done by auger boring with a steel casing when exact grade is critical.
How do I get a directional drilling estimate in Newport News?+
Call Davis Underground Solutions, Inc. at (855) 520-2670; estimates are free, and the crew that answers is the one that does the work. Have the length of the run, what is going in the ground and what it crosses ready, and a site walk will usually confirm the price.
More Virginia cities
Every listed city in Virginia has its own page; the Virginia page covers the state's ground, permits and contractor.