Serving Richmond and all of Virginia
Directional drilling contractors in Richmond, VA
Horizontal directional drilling, auger boring and pipe boring in Richmond: conduit, fiber, water, sewer and gas lines put under roads, driveways and landscaping without an open trench.
Directional drilling in Richmond is how new conduit, fiber, water, sewer and gas lines get under a road, a driveway or a yard without anyone opening a trench across it. A small pit at each end, a steered bore between them, and the pipe is pulled back through the hole. The surface stays as it was, traffic keeps moving and the landscaping survives.
In Virginia the listed contractor is Davis Underground Solutions, Inc., based in Powder Springs, Georgia, which drills across the Southeast and quotes any mobilization up front. See Davis Underground Solutions's Virginia drilling page for the crew, the equipment and recent projects, or call (855) 520-2670; estimates are free.
Serving Richmond and all of Virginia
Davis Underground Solutions, Inc.
Directional drilling, auger boring and utility installation; locates, bore plan and permits handled. It's boring. But we dig it.
What is in the ground in Richmond
Piedmont clay and saprolite over granite and schist across Northern Virginia and Richmond; the Tidewater is sand and soft clay with a high water table, the Shenandoah Valley is limestone karst, and the southwest is shale and sandstone.
Data-center duct banks in Loudoun and Prince William, fiber to the home under state broadband grants, water and sewer extensions and VDOT highway crossings. Locate requests in Virginia go through Virginia 811; crossings of state routes are permitted by VDOT.
How a bore in Richmond is done
A bore in Richmond is planned backward from what the pipe can tolerate. The bend radius of the product, the depth the permit requires under a Virginia road or a creek, and the soil along the path set the entry angle and the length. The pilot pass is steered and tracked from the surface; one or more reaming passes open the hole, and the pipe or conduit is pulled back through on the last pass with a swivel so it does not twist.
Hiring a drilling contractor in Richmond
Ask any contractor quoting work in Richmond for the bore plan, not just a price per foot. It should show depth, entry and exit points, the soil they expect and how they will handle fluid. Ask who owns the rig and who is on the crew, whether they carry the permits for Virginia road or rail crossings, and what happens if the bore meets rock or an unmarked line. Written answers to those questions tell you more than the number at the bottom.
Estimates are free. Call now: (855) 520-2670.
Drilling and boring services in Richmond
Each page explains one method or utility type: what gets installed, how deep, what the permit requires and what moves the price.
Directional Drilling
Horizontal directional drilling (HDD) for new underground utilities: steered bores under roads, driveways, parking lots, creeks and landscaping with no open trench.
Directional Drilling explained →
Horizontal Boring
Horizontal boring for conduit, casing and carrier pipe where digging across a surface is not an option.
Horizontal Boring explained →
Auger Boring
Steel-cased auger bores for road, rail and railroad crossings that need a straight, on-grade casing.
Auger Boring explained →
Pipe Boring
Boring and pulling in HDPE or steel product pipe from a few inches up to large-diameter casings.
Pipe Boring explained →
Fiber Optic Drilling
Directional drilling for fiber and communications duct: long bores, multiple ducts in one pull, tight easements.
Fiber Optic Drilling explained →
Electrical Conduit Drilling
Bores for primary and secondary power conduit, lighting circuits and site electrical feeds.
Electrical Conduit Drilling explained →
Utility Drilling
Multi-utility installs for developers and utilities: power, gas, water, sewer and telecom on one site plan.
Utility Drilling explained →
Sewer Line Drilling
Directional drilling and boring for new gravity-adjusted force mains, laterals and sewer crossings.
Sewer Line Drilling explained →
Water Main Drilling
HDD installation of new water mains and service lines, including creek and road crossings.
Water Main Drilling explained →
Gas Line Drilling
Bores for new natural gas mains and services, coordinated with the utility and its operator-qualification rules.
Gas Line Drilling explained →
Questions we hear in Richmond
Can directional drilling install a sewer line in Richmond?+
Yes, with planning. Gravity sewer needs a consistent slope that HDD can hold on shorter bores with careful steering; force mains and pressure sewer have no slope requirement and are routine. Many Richmond sewer crossings are done by auger boring with a steel casing when exact grade is critical.
Do I need a permit to bore under a street in Richmond?+
Yes. Work in a public right-of-way needs a permit from the city or county, and a crossing of a state route needs a Virginia DOT encroachment or utility permit. Railroad crossings have their own agreement. Your contractor should file these; make sure the quote says who does.
How long does a bore take in Richmond?+
A single residential or small commercial crossing of a few hundred feet is usually a one- or two-day job including setup, pilot bore, reaming and pullback. Longer or larger bores, rock, and permit-driven traffic control stretch that out. Restoration is limited to the two pits.
How do I get a directional drilling estimate in Richmond?+
Call Davis Underground Solutions, Inc. at (855) 520-2670; estimates are free, and the crew that answers is the one that does the work. Have the length of the run, what is going in the ground and what it crosses ready, and a site walk will usually confirm the price.
More Virginia cities
Every listed city in Virginia has its own page; the Virginia page covers the state's ground, permits and contractor.